MOLDITQUICK

Precision CNC Machining and Mold Manufacturing — Complete Guide (2026)

RCRay Chan·2026-10-25·27 min read
Table of Contents

What precision means as a number

“Precision machining” is one of the most abused phrases in contract manufacturing sales copy. Every shop claims it, and almost none of them define it. A defensible definition is short: precision is the tolerance band a shop can hold at a stated capability, on a stated feature, measured by a stated instrument, across a production run — not the tightest number ever recorded on a single hero part.

That definition matters because the commercial consequences are asymmetric. A good CNC machining service will tell you that ±0.005 mm is achievable on a mold cavity insert and absurd on a 400 mm aluminium housing, and will quote both accordingly. A weak one will agree to ±0.005 mm on everything, win the order, and then either lose money or ship parts that fail at your incoming inspection.

This guide deals with precision CNC machining and mold manufacturing as one subject, because in practice they are the same discipline applied to two objects. The first object is a part that must fit, seal, wear or transmit motion. The second is a mold whose cavity, core, inserts and parting surfaces must hold a tolerance so that tens of thousands of parts hold theirs. The measurement methods, the machine selection logic, the thermal control and the cost structure are identical — which is why roughly 31% of the precision machining workload at a typical Chinese precision shop is mold and die work, against about 16% automotive precision parts (FirstMold published figures).

The Snapshot

  • A precision shop markets ±0.005 mm, while standard ISO 2768-M general tolerance is ±0.127 mm — a 25× difference in band width, and a large difference in price.
  • Surface finish is a separate axis: precision work reaches Ra ≤ 0.8 µm and down to Ra 0.2 µm, against Ra 0.8–1.6 µm for standard routing (FirstMold precision page).
  • Mold-quality machining typically means HRC 60+ hardened steel, deep cavities to a 10:1 aspect ratio, micro-features at Ø0.1 mm, and thin walls at 0.8 mm.
  • Verification is part of the definition: 100% CMM verification with GD&T compliance and an FAI report on precision work, versus sampling and calipers on standard work.
  • Published machining guidelines put standard linear tolerance at ISO 2768-1 class f for metals and class m for plastics, with hole tolerance at ±0.005 in (±0.127 mm) and specified bores to ±0.0005 in (±0.0127 mm) (Protolabs published guidelines).
  • Machine capability is not the only limit: thermal drift, workholding deflection and tool wear each consume part of the band, so a shop quoting ±0.005 mm must also control room temperature and probe in-process.
  • Capability, not tolerance, is the real production requirement: a critical dimension at Cpk ≥ 1.33 means the process distribution fits inside the print with margin, which is what a precision mold is bought to guarantee.

Table of Contents

  1. What precision means as a number
  2. The Snapshot
  3. Tolerance classes and what they cost
  4. Machine selection: 3-axis, 5-axis and mill-turn
  5. Thermal control, the invisible variable
  6. Hard milling of mold steel
  7. Wire EDM, sinker EDM and jig grinding
  8. Workholding and in-process probing
  9. Metrology: CMM, VMM, GD&T and capability
  10. Where precision machining meets mold manufacturing
  11. Mold component tolerances that decide part quality
  12. Materials that test the process
  13. Over-tolerancing: how a drawing inflates cost
  14. Surface finish targets and how they are produced
  15. Process capability and first article inspection
  16. How a precision quote is built
  17. Vetting a precision mold and machining supplier
  18. Common precision failures and root causes
  19. Frequently Asked Questions
  20. Sources
  21. Related resources

Tolerance classes and what they cost

Tolerance is not a binary quality flag; it is a ladder with a price attached to every rung. The useful reference ladder for machined and molded features:

Tolerance band Typical class How it is achieved Relative cost
±0.127 mm (±0.005 in) ISO 2768-1 f (metals) / m (plastics) Standard 3-axis machining, standard inspection Baseline
±0.05 mm Tight but routine Controlled workholding, sharp tooling, probing 1.2–1.5×
±0.02 mm Precision 5-axis or dedicated fixtures, temperature control, CMM verification 1.8–2.5×
±0.01 mm High precision Precision machine tools, in-process probing, grinding or jig grinding 3–4×
±0.005 mm Ultra precision Temperature-controlled environment, hard milling or grinding, 100% CMM 4–6×
< ±0.005 mm Special process Jig boring, lapping, jig grinding, optical alignment Case by case

Two engineering facts sit under this table and explain most of the price curve.

First, tolerance is bought with process control, not with better machines alone. Moving from ±0.05 mm to ±0.01 mm is mostly about removing variation: fixture rigidity, tool wear compensation, spindle thermal growth, and probing to close the loop. The remaining error budget after those steps is small, so every remaining source — material stress, clamping distortion, coolant temperature — must be controlled explicitly.

Second, the band applies to the feature, not the drawing. A Ø20 H7 bore and a cosmetic outer profile on the same part are not the same manufacturing problem. Precision work is affordable when the tight dimensions are few and identified; it becomes expensive when a note says “all dimensions ±0.01” across a six-sided part, because every setup then needs to be a precision setup.

When you read a shop’s claim, ask which rung it refers to, on what size part, in what material, verified how. “±0.005 mm” on a 30 mm hardened insert and “±0.005 mm” on a 500 mm welded frame are claims of very different credibility.

Machine selection: 3-axis, 5-axis and mill-turn

Three-axis machining covers the majority of prismatic parts: plates, housings, brackets, electrode blanks. It is the cheapest route per cubic centimetre of removed material and it is entirely adequate when the part has accessible faces and tolerances at or above ±0.02 mm.

Five-axis machining earns its cost in three situations, and buyers should be able to name which one applies to their part:

  1. Compound geometry — features on non-orthogonal faces that would otherwise need four or five separate setups. Each eliminated setup removes a datum-transfer error and a queue day.
  2. Deep cavities with contour walls in mold work, where the tool must stay normal to the surface to control both finish and wall accuracy.
  3. Short, stiff tools on deep features — tilting the head lets a short tool reach geometry that would otherwise need a long, flexible tool that chatter ruins.

Mill-turn (turn-mill or multi-tasking) suits parts that combine rotational and prismatic features: shafts with cross-holes, valve bodies, connector shells. It removes a re-chuck, which is the single largest source of concentricity error in turned parts.

Machine condition matters more than machine brand. A ten-year-old five-axis machine that is geometrically calibrated twice a year, probed and thermostatted will out-hold a new machine running in a workshop that swings 12 °C between shifts. Ask for the calibration interval and the last laser-interferometer or ballbar report.

For mold work specifically, the machine list that matters is not only milling: it includes sinker EDM for closed cavities and sharp internal corners, wire EDM for punches, die plates and insert splits, jig grinding for hardened bores and precise hole locations, and jig boring where hole position tolerance dominates. Hardened steel at HRC 60+ cannot be milled with impunity; it is ground, EDMed, or hard-milled with the right cutter geometry and a light radial stepover.

Thermal control, the invisible variable

A steel part is a thermometer. Carbon steel expands about 11–12 µm per metre per °C; aluminium about 22–23 µm per metre per °C. On a 500 mm aluminium part, a 5 °C workshop swing moves a feature by roughly 55 µm — more than the entire tolerance band being claimed.

Consequences for buyers:

  • A shop claiming ±0.005 mm must machine and inspect in a temperature-controlled room (20 ± 1 °C is the usual standard for a metrology lab), and must let the part soak to room temperature before the final measurement.
  • If incoming inspection in your plant happens in a shop that runs at 28 °C in summer, your measurements will not match the supplier’s report — and neither party is lying. Agree the measurement temperature in writing.
  • Large parts should be rough-machined, stress-relieved, and finish-machined after relaxation; skipping that step guarantees movement after delivery.
  • Inspection reports should state the ambient temperature at measurement, especially for parts over 200 mm.

This one paragraph prevents more supplier disputes than any tolerance clause, because most “out of tolerance” arguments on large precision parts are temperature arguments in disguise.

Hard milling of mold steel

Mold cavities and inserts are commonly delivered in pre-hardened steel around HRC 30–40, and in some applications hardened to HRC 50–62 after heat treatment. Hard milling — cutting hardened steel directly with coated carbide — has largely replaced rough-mill-then-EDM for many cavity shapes, because it is faster and leaves a surface that needs less benching.

What hard milling demands, and what to verify with a supplier:

  • Machine rigidity and thermal stability, since cutting forces on hardened steel are high and deflection shows directly in the wall.
  • High-speed spindles (typically 15,000–30,000 rpm class for small cutters) with low runout; a few microns of runout destroys tool life and edge quality.
  • Small radial stepovers with controlled axial depth, so the tool does not rub; rubbing work-hardens the surface and shortens die life.
  • Cutter geometry and coating matched to hardness, and a tool-life policy that changes cutters before wear shows in the part.
  • Finishing allowance left deliberately where a polished or textured surface will follow.

For moulds that will be polished to a Class A finish, the machining step should leave a uniform, predictable stock rather than the minimum possible stock. A bencher removing 0.02 mm uniformly produces a better surface than one chasing a scrappy 0.005 mm.

Wire EDM, sinker EDM and jig grinding

Each of these processes has a signature capability that milling cannot replace.

Wire EDM cuts conductive material with a wire electrode, holding position accuracy in the low microns on features that are through-thickness. It is the standard route for punch and die plate openings, insert splits, and sharp internal corners where milling radius would be unacceptable. It leaves a recast layer on the cut surface; on fatigue-critical or polished surfaces, specify a skim pass sequence and a post-EDM stress relief or polishing step to remove it.

Sinker (ram) EDM burns three-dimensional cavities using a shaped electrode, which is why electrode manufacture is a precision machining job in itself. The electrode’s tolerance is transferred to the cavity, so an electrode made to ±0.01 mm produces a cavity at ±0.01 mm plus spark gap variation. This is the direct reason precision mold work needs precision machining capability in the same shop: the electrode and the cavity must be made to a common datum, on machines that share a measurement loop.

Jig grinding grinds holes and profiles to precise location and size in hardened material — the classic route to a hardened die block whose dowel and ejector holes must sit within microns of nominal, and the reason jig-ground locators are trusted where reamed holes are not.

Jig boring remains the reference method for hole position at the sub-0.01 mm level on large plates, and it is still the answer for tooling balls, datum holes and inspection masters.

Our own model for mold work is explicit and worth stating because it affects how you should read this guide: mold design and manufacturing are delivered through a vetted tool-making network coordinated by our engineering team, not from a single building we own. The inspection and acceptance discipline below applies to that network — including CMM verification and first-article documentation — because precision is a specification you enforce, not a wall you own.

Workholding and in-process probing

Half of the “machine accuracy” in a precision job is really fixture accuracy. A part that moves 0.01 mm under clamping force has lost the tolerance before the cutter touches it.

Practical requirements to look for:

  • Dedicated fixtures or soft jaws machined in place, so the location is created on the same machine that cuts the part.
  • Minimal, balanced clamping force, with support under the cutting zone; thin-wall parts get fixture-supported or machined with a sacrificial web.
  • Datum consistency — the datum scheme on the drawing must be the datum scheme in the fixture and on the CMM. Datum mismatch is the most common cause of a part that inspects out at the supplier and functions badly in the assembly.
  • In-process probing on precision work: the probe verifies the workpiece position, updates work offsets, and checks a critical feature before the part leaves the machine.
  • First-off inspection by the operator, then a QC check, then a CMM report on the drawing’s critical dimensions.

Probing is what makes ±0.005 mm repeatable rather than lucky. Without it, the shop is relying on machine geometry and fixture craftsmanship alone, which works until a warm afternoon.

Metrology: CMM, VMM, GD&T and capability

Measurement is where precision claims become evidence. The instruments and what they prove:

Instrument What it verifies Typical role
Coordinate measuring machine (CMM) 3D geometry, position, form, orientation per GD&T Authority for complex geometry and tight geometric tolerance
Vision measuring machine (VMM) 2D features, thin walls, micro-holes, soft parts Non-contact verification of features a stylus would deform
Height gauge / Z-axis gauge Depths, step heights, blind-hole depth Fast verification of vertical dimensions
Micrometre, bore gauge, air gauge Size of bores and shafts Production gauging at the machine
Surface roughness tester Ra / Rz on specified faces Finish acceptance
Contour / roundness tester Form error on shafts and bores Rotational parts

Three process requirements make those readings trustworthy:

  1. GD&T compliance is not the same as dimensional compliance. A part can be inside every size tolerance and still fail position, profile or perpendicularity. Demand a report that follows the drawing’s datum reference frame.
  2. Capability needs a distribution. A single-part report proves one part. Cpk ≥ 1.33 on critical dimensions requires a sample over time, with the same process, and the calculation stated. For mold acceptance, capability on the molded part is the real acceptance criterion.
  3. CMM programs need acceptance. ISO 10360 defines how CMM performance is tested; a shop that cannot tell you when its CMM was last verified cannot defend a micron-level claim.

For medtech work, add ISO 13485 process validation, cleanliness and traceability expectations; for aerospace, AS9102 first article reporting; for automotive production parts, PPAP with capability studies. The measurement discipline is the same; the paperwork is not.

Where precision machining meets mold manufacturing

A precision injection mold is a stack of precisely related parts: cavity insert, core insert, slides, lifters, ejector plates, guide pillars and bushes, hot-runner manifold, and the parting surfaces that seal them. Their relationship, not their individual beauty, produces good parts.

The four properties a precision mold must hold:

  • Cavity/core dimensional accuracy to the part’s tolerance, with shrinkage allowance applied per material and per wall thickness.
  • Interchangeability — a replacement insert must drop into the existing pocket without benching. This is what “100% interchangeable, no fitting” means in practice, and it is a machining discipline, not a promise.
  • Parting-line and shut-off integrity, held to microns on the shut-off faces so flash does not appear under injection pressure.
  • Register between cavity and core, maintained by guide pillars and by machining both halves from a common datum.

The reverse dependency is also worth stating: a molded part’s tolerance can never be tighter than its mold’s cavity tolerance plus the process variation. If a print calls for ±0.05 mm on a molded feature, the cavity is usually machined to roughly ±0.01–0.02 mm, and the process adds the rest. That is why buyers who demand molded tolerances tighter than the mold can support end up paying for tool rework instead of parts.

Mold component tolerances that decide part quality

A working reference for how mold components are typically toleranced. Values are engineering practice ranges, not a standard — always confirm against the tool drawing and the part print.

Mold component Feature Typical tolerance Why it matters
Cavity insert Molding surface dimensions ±0.01–0.02 mm Directly transfers to the molded part
Core insert Molding surface dimensions ±0.01–0.02 mm Wall thickness control
Shut-off faces Mating surfaces ≤ 0.005–0.01 mm Flash prevention under injection pressure
Guide pillar/bush Fit and position H7/g6 class fits, position ≤ 0.01 mm Cavity-core register
Ejector pin holes Hole position and size Position ≤ 0.01 mm, H7 fit Pin bind and mark prevention
Insert pocket Pocket dimensions +0.005/0 mm class Interchangeability without benching
Parting line Flatness and step ≤ 0.01 mm Visible witness line
Hot runner manifold Flatness and seal faces ≤ 0.005 mm Leak-free melt transfer
Cooling channels Position and depth ±0.1–0.3 mm Thermal uniformity, no thin-wall breakthrough

Read the table as a priority list. When a tool is late or over budget, the compromise should come from the cosmetic surfaces and never from the shut-offs, the register or the insert pockets.

Materials that test the process

Precision capability is material-specific. The materials that most often separate competent shops from optimistic ones:

  • Hardened tool steels — P20, H13, S136, 718H, NAK80; hardness from pre-hardened HRC 30–40 to HRC 50–62 after treatment. Machinability drops sharply with hardness.
  • Stainless steels — 17-4 PH, 316L, 420; work-hardening and built-up edge are the recurring problems, and thermal control matters more than on aluminium.
  • Aluminium alloys — 6061-T651, 7075-T651, 2024-T351; easy to cut, prone to distortion on thin walls, and the reason fixture design matters.
  • Titanium — Grade 5 (Ti-6Al-4V), Grade 2; low thermal conductivity keeps heat in the cut, so tool deflection, springback and work hardening drive the strategy.
  • Superalloys — Inconel 718/625, Hastelloy C276, Waspaloy; slow speeds, rigid setups, and a real cost premium that a quote should reflect openly.
  • High-performance polymers — PEEK (including 30% glass- or carbon-filled), PEI (Ultem), PPS; stress cracking and burr control are the failure modes, and annealing is often required after machining.

Two questions expose material competence quickly: “which cutter and which parameters would you use on Inconel 718?” and “what do you do about residual stress in a 300 mm PEEK part?” A shop that machines these materials has ready answers; a shop that does not will pivot to sales language.

Over-tolerancing: how a drawing inflates cost

The most expensive word on a drawing is “all”. Consider a 200 × 150 mm aluminium bracket with 40 dimensions. Toleranced at ISO 2768-f, it is a straightforward 3-axis job. Toleranced “±0.01 mm all dims”, it needs a precision setup, a stress-relieved blank, a fixture, in-process probing and a CMM report — for a bracket whose function needs ±0.1 mm.

A practical method for setting tolerance:

  1. Tolerance the function, not the geometry. Ask what the dimension does: locates, seals, wears, or merely fills space. Space-filling dimensions get general tolerance.
  2. Stack the assembly. Only the last few dimensions in a stack need precision, and the rest can be relaxed to absorb it.
  3. Use geometric tolerance correctly. Position and profile are usually cheaper than an equivalent blanket size tolerance, because they define an unambiguous acceptance zone.
  4. Name the datum. A tight dimension without a datum is unmeasurable in a dispute.
  5. State the inspection method, so both sides measure the same zone the same way.

In practice, reviewers who go through this exercise remove 60–80% of the tight tolerances on a typical drawing without changing function — and cut the price with them.

Surface finish targets and how they are produced

Finish and tolerance are separate specifications that share a budget. Reference targets:

Ra target How it is achieved Typical application
Ra 3.2–6.3 µm Standard milling or turning Non-functional surfaces, clearance faces
Ra 1.6 µm Finer finishing passes, sharp tooling General machined interfaces
Ra 0.8 µm Precision finishing, controlled stepover Sealing faces, bearing seats, cosmetic parts
Ra 0.4 µm Fine finishing, grinding Sliding and sealing surfaces
Ra 0.2 µm Grinding, lapping, polishing Optical molds, high-cycle seals
Ra ≤ 0.1 µm Polishing to mirror (precision claim for mold work) Optical and high-gloss molding surfaces

Three practical notes. Finish is directional — a turned surface has a lay that matters for seals. Specifying finish everywhere is a common and expensive reflex; specify it on functional and visible faces. And polishing removes material, so a polished face must be machined with stock and inspected after polishing, not before.

Process capability and first article inspection

Acceptance should be statistical, not anecdotal. A first article programme that actually protects a program has five parts:

  1. FAI dimensional report covering every dimension on the drawing, with the instrument used per feature.
  2. Material and hardness certification, traceable to heat number, including any heat treatment and coating.
  3. Capability study on the critical dimensions — Cpk ≥ 1.33 as the usual automotive-grade threshold, with sample size and period stated.
  4. Functional verification where relevant: leak test, fit check against the mating part, torque test on threaded features.
  5. Documentation package — drawing revision referenced on the report, so there is no ambiguity about what was measured.

For molded parts, capability should be demonstrated on the molded part from the production tool, not on the cavity. That distinction is where many “precision mold” claims quietly end: a beautiful cavity can still produce a variable part if cooling, gate location and process window are wrong.

How a precision quote is built

A precision quote differs from a standard machining quote in five lines:

  • Programming and CAM time — 5-axis and complex 3D paths take real engineering hours.
  • Fixtures — soft jaws or dedicated fixtures are quoted once and often reusable.
  • Inspection — CMM programming plus reporting time, which on small batches can approach machining time.
  • Machine rate premium — 5-axis, jig grinding and sinker EDM carry materially higher hourly rates than 3-axis milling.
  • Yield allowance — precision work has a scrap allowance built into the price, because a tightly toleranced part is more likely to require a second attempt.

Published service claims in this market put a quotation inside 24 hours, prototypes at 4–7 working days and low-volume production at 7–15 working days (FirstMold). Treat those as the market norm and put milestone dates on the purchase order rather than relying on the headline number.

The single most useful thing a buyer can send is a drawing whose tolerances are already prioritised — critical, functional, cosmetic, general. Shops quote prioritised drawings accurately and invent optimistic numbers for a drawing where everything is bold.

Vetting a precision mold and machining supplier

A precision mold and machining services supplier is judged on the same twelve answers as any precision machine shop, plus three that are specific to tooling:

  1. Which tolerance can you hold on my feature, with which process, verified how? Expect a specific answer, not ±0.005 mm for everything.
  2. Is the machine shop climate-controlled, and at what band? A metrology-grade answer is 20 ± 1 °C; “we have air conditioning” is not.
  3. When was your CMM last verified, and against which standard? ISO 10360 is the reference.
  4. Who makes the electrodes and inserts — you or a subcontractor? For mold work the answer determines whether tolerances share a datum.
  5. Can I see a CMM report for a comparable part? Redacted is fine; absent is not.
  6. What is your datum and fixture strategy for my part? Reveals whether they engineer setups or improvise them.
  7. How do you handle heat treatment and stress relief, and who does it?
  8. What is your scrap and rework rate on precision work? Nobody likes the question; good shops answer with a number.
  9. Which quality system, certificate number and scope? ISO 9001 baseline, IATF 16949 automotive, AS9100 aerospace, ISO 13485 medical.
  10. Do you machine the production mold and run the molding, and are those the same partner? Same-partner answers reduce blame-shifting when a dimension drifts.
  11. How do you report non-conformance, and what is your CAPA process?
  12. What is your process for a design change after first article — re-quote, engineering change note, revision control on the drawing?

For a precision medtech component manufacturer, add questions about validation, cleanroom handling, biocompatibility documentation and change control, because a validated component cannot be altered without re-qualification.

Common precision failures and root causes

Failure Root cause Fix
Dimension drifts between first-off and 100th part Tool wear, thermal growth Probing loop, tool-life management, temperature soak
Part in tolerance but assembly will not close Datum mismatch between drawing, fixture and CMM Align datum scheme across all three; re-inspect
Thin wall distorts after machining Residual stress, clamp force Stress-relieved stock, reduced clamping, finish passes both sides
Bore out of round Interrupted cut, weak setup, worn spindle Fixture support, boring rather than reaming, spindle check
Flash on molded parts from a “precision” tool Shut-off faces outside tolerance, insufficient clamping Machine shut-offs to ≤ 0.005 mm, check clamp tonnage
Polished surface shows waves Non-uniform finishing stock Leave uniform allowance, control stepover, polish after inspection of stock
CMM and supplier disagree Different temperature, different program, different datum Agree measurement plan and temperature in writing
Recast layer cracks on EDM surface Missing skim passes, no post-EDM stress relief Multi-pass EDM, stress relief, remove recast on critical surfaces

Frequently Asked Questions

1. What tolerance can precision CNC machining actually hold? Excellent shops hold ±0.005 mm on small, rigid, hardened features with temperature control and 100% CMM verification, and roughly ±0.01–0.02 mm as a working precision band on general parts. Standard ISO 2768-1 class f general tolerance is ±0.127 mm, so most parts need far less than the headline number.

2. Is ±0.005 mm realistic on a large aluminium part? Rarely, and never without cost. Aluminium expands about 22–23 µm per metre per °C, so a 500 mm part moves roughly 55 µm across a 5 °C swing. On large parts, expect ±0.02–0.05 mm as a practical precision band, measured at an agreed temperature.

3. How does precision machining relate to mold manufacturing? Directly. A molded part cannot hold a tolerance tighter than its cavity plus process variation, so a part print at ±0.05 mm usually implies a cavity machined to ±0.01–0.02 mm. Precision machining of the cavity, core, inserts and shut-offs is what creates the molded part’s capability.

4. Why does hard milling matter for molds? Because many cavities are cut in steel at HRC 30–40 and some at HRC 50–62, where cutting forces and tool wear are severe. Hard milling done properly avoids EDM on large surfaces, shortens the bench-work stage and leaves a more uniform surface for polishing.

5. When do I need wire EDM instead of milling? When you need sharp internal corners, through-features with sub-0.01 mm position, or an insert split. Wire EDM removes no material by force, so it also suits thin and delicate geometry — at the cost of a recast layer that must be removed on fatigue-critical or polished surfaces.

6. What does GD&T add over plus/minus tolerances? An unambiguous acceptance zone tied to a datum reference frame. Position, profile and perpendicularity describe function directly and usually allow more manufacturing freedom than an equivalent blanket size tolerance, which typically lowers price.

7. How do I verify that a supplier’s CMM report is trustworthy? Ask when the CMM was last verified (ISO 10360 is the acceptance standard), whether the program follows the drawing’s datum frame, and at what ambient temperature the measurement was taken. Then re-measure one critical feature in your own lab at the agreed temperature and compare.

8. What is a reasonable Cpk target for a precision part? Cpk ≥ 1.33 is the usual automotive-grade threshold for critical dimensions, with PPAP-style capability studies showing sample size and period. For one-off precision parts, a capability study is not meaningful; a full FAI report is.

9. Can one supplier machine the mold and run the molding? Sometimes, and it reduces blame-shifting when a dimension drifts. More commonly the tool is built by a specialist tool-maker and production runs at a molder. What must not vary is the datum scheme and the inspection method — agree those across both parties in writing.

10. What surface finish should I specify? Only where it functions. Ra 3.2–6.3 µm covers non-functional faces, Ra 1.6 µm general machined interfaces, Ra 0.8 µm sealing faces and bearing seats, Ra 0.4 µm sliding surfaces, and Ra 0.2 µm or better for optical mold surfaces. Specifying finish on every face is a common and expensive habit.

11. Why is my precision quote several times the standard machining price? Because it buys process control, not just metal removal: climate control, dedicated fixtures, in-process probing, 5-axis or grinding time, CMM programming and reporting, and a scrap allowance. A ±0.005 mm part can be 4–6× the cost of the same part at general tolerance.

12. How fast can a precision mold be delivered? Market norms in this industry put prototypes at 4–7 working days and low-volume production at 7–15 working days, with quotations inside 24 hours. Mold building itself is a longer cycle driven by design review, steel lead time, machining sequence and trials — ask for a milestone schedule with trial dates rather than a single number.

13. What documentation should come with a precision mold? Tool drawing with revision, steel and hardness certificates, CMM reports on cavity/core and shut-off faces, water-circuit and hot-runner test records, trial-shot reports with process parameters, and a first-article report on the molded parts. For regulated industries add PPAP or AS9102-style reporting.

14. Does a Chinese precision shop need IATF 16949 or ISO 13485? Only if your program requires it — but then it is mandatory, not optional. IATF 16949 for automotive production parts, ISO 13485 for medical devices, AS9100 for aerospace, with ISO 9001 as the baseline. Ask for certificate number and scope, and confirm the scope covers machining rather than only trading.

Sources

  • FirstMold, precision CNC machining service page (±0.005 mm tolerance, ISO 2768-M ±0.127 mm standard, Ra 0.1–0.8 µm, 10:1 deep holes, Ø0.1 mm micro-holes, 0.8 mm walls, 31% mold/die workload, 16% automotive, CMM/VMM verification, 24-hour quote): https://firstmold.com/precision-cnc-machining-service/
  • Protolabs, CNC machining design guidelines (ISO 2768-1 class f for metals and m for plastics, ±0.005 in / ±0.127 mm, ±0.0005 in / ±0.0127 mm bore tolerance, minimum text width 0.018 in / 0.457 mm): https://www.protolabs.com/services/cnc-machining/
  • ISO 2768-1 and ISO 2768-2 — general tolerances for linear/angular dimensions and for geometrical tolerances.
  • ISO 1101 — geometrical product specification (GD&T).
  • ISO 286 — ISO system of limits and fits (H7/g6 class fits referenced above).
  • ISO 10360 — acceptance and reverification tests for coordinate measuring machines.
  • ISO 9001, IATF 16949, ISO 13485, AS9100D — quality management system standards referenced for supplier verification.
  • AS9102 — first article inspection requirements (aerospace).
  • AIAG PPAP manual — production part approval process, including capability study expectations (Cpk ≥ 1.33).
  • 【待确认】 Exact coefficient-of-thermal-expansion figures for the specific steel and aluminium grades quoted above should be confirmed against the mill certificate for the actual material before contractual use.

NEXT STEP

Ready to Start Your Project?

Send us your requirements — our team responds within 24 hours. Pricing and a realistic lead time come with the reply.

RC

Written by

Ray Chan

Export Brand Manager · Injection Molding, Mold Making & DFM. Ray helps global importers and integrators source factory-direct plastic parts and tooling.

← Back to Blog